BMC64 is a C64 emulator for the Raspberry Pi. Recent updates: Support for the Raspberry Pi 4 and 5. Improvements for cartridges, the C64/C128 modem and 8bitdo controllers.

The c64-hw-sim simulates the motherboards of the Commodore C64 (ASSY 250407), pin by pin. You can lift the leg of a chip, short it to ground or to +5V, pull a chip out of its socket, or open a resistor. Then you watch what the machine does: the picture on the monitor, the keyboard and every signal on the board. The simulator is developed by Salvatore Sanfilippo and is available for macOS and Linux.

AmiMSX 4.0 is a community update of AmiMSX, the MSX, MSX2 and MSX2+ emulator by Juan Antonio Gomez Galvez. Improvements for Z80, VDP, MSX2+, Display, CPU, Options, Cartridges, ROM and Disks.

KVICE is a Commodore 8-bit machine package for the classic Amiga computer, developed by krabobmkd. The package is based on VICE 3.1 and includes x64 (C64), xplus4 (C16, C116 & Plus/4) and xvic (VIC20). As a bonus the program PetMate is also included, which is a PETSCII art drawing tool.

MorphUAE is a MUI-based variant of E-UAE for MorphOS with some additional features. The emulator is available for MorphOS 3.x and is developed by Stefan Blixth (OnyxSoft).

AmiAtari2600 is an Atari 2600 emulator for classic Amiga computers (OCS, ECS and AGA), developed by Thomas Radeck. It runs without SDL and without OS graphics and drives the Copper, bit-planes, Paula and BEAMCON0 directly.

POKE64 is a VICE-based C64 emulation for the Apple iPad, developed by Alessandro Capano. The interface is designed around touch, external controllers, modern media management and the expanded hardware people used. The features are: VICE, ReSID, ReSID-FP, FastSID, Dual SID, Fast or accurate disk I/O, RUE (16 MB), Media library, Touch and original controls with joystick, keyboard, mouse, virtual Paddles, KoalaPad controls and Apple Pencil support.cc

Denise is a cycle accurate and platform independent C64 / Amiga emulator. This emulator is developed by piciji. The recent changes are: Improvements for Shader, UI, Sprite collisions and Warp. Support for libresidfp Trilogic Expert, Prophet64, Disk Demon speeder and USBSID-PICO.

POKE64 is a VICE-based C64 emulation for the Apple iPad, developed by Alessandro Capano. The interface is designed around touch, external controllers, modern media management and the expanded hardware people used. The features are: VICE, ReSID, ReSID-FP, FastSID, Dual SID, Fast or accurate disk I/O, RUE (16 MB), Media library, Touch and original controls with joystick, keyboard, mouse, virtual Paddles, KoalaPad controls and Apple Pencil support.

You can watch a new video from the Dan Wood YouTube channel. In this video: Dan shows the brand-new ARM version of the AROS Research Operating System on the Raspberry Pi.

BMC64 is a C64 emulator for the Raspberry Pi. Recent updates: Improvements for Wi-Fi and Ethernet, BBS access, C64 OS networking and USB. And support for 8BitDo Retro devices. BMC64 is tested on Raspberry Pi Zero W, Zero 2 W, 2B, 3A+ and 3B+.

FloppyCaseis a program that will make playing Amiga games on a Linux system a lot easier. It automatically fetches the WHDLoad helper and the Amiberry Amiga emulator for you and configures them. Just install the app, add your games and purchased Amiga ROMs, and start playing.

vAmigaWeb is an Amiga emulator that can be used in any modern internet browser. The emulator supports the A500 and A1200 computers, with audio, external game controllers, free ROM replacements and a virtual keyboard.

Per Håkan Sundell released a new version of his Commodore C64 emulator. Changes in this version: Reverse playback, improvements for time-travel debugging, DirectX rendering, cartridges, compatibility and the documentation.

MorphUAE is a MUI-based variant of E-UAE for MorphOS with some additional features. The emulator is available for MorphOS 3.x and is developed by Stefan Blixth (OnyxSoft).

AmiArcadia is a emulator of early game consoles like the PHUNSY, Elektor TV Games Computer, Interton VC 4000, Emerson Arcadia 2001, Central Data 2650 and others. Ami Arcadia is available for the 68k Amiga, Amiga OS4, MorphOS and Windows.

A new version of YAPE is available. YAPE is a Windows emulator for the Commodore Plus/4 computer. The changes in this release are: Improvements for the Find dialog, SID card emulation, debugger, MP4 and .LST. Support for the SoundX board with Yamaha Adlib YM3812 and the CA65 assembly listing.

A/NES is a Nintendo Entertainment System emulator for AmigaOS. The changes in this version: Improvements for keyboard, interrupt, graphics, MMC3 IRQ and a new ASCII-logo.

Copperline is an Amiga emulator for the PC (macOS, Linux and Windows) written in the Rust language. The 68000, Agnus, Denise, Paula, the CIAs and the floppy, all scheduled against a single colour-clock timeline. The features are: OCS, ECS, AGA, 68000 - 68040, ADF, ADZ, DMS, SCP, Gayle IDE, A2091 SCSI, CDTV and CD32 CD-ROM.

Amiberry is an optimized Amiga emulator for Intel/AMD, ARM (32bit and 64bit) and RISC-V platforms. It runs on both Linux and macOS. Amiberry uses the core from WinUAE, it has JIT support, a WHDLoad booter, support for RetroArch controller mapping and much more.

JPL64 is an emulator for the Commodore C64 computer, developed by James Purcell. This emulator is still in development, and James would appreciate comments and improvement suggestions.

Thorsten Kattanek released a new version of his Commodore C64 emulator. The recent changes are: Improvements for GeoRam, Cartridges, REU, reSID, DigiBoost, Soundbuffer, SID Emulations Engine, T64, TAP, SDL2, Debugger, Disassembler, PRG, Autostart, Warp / Normal modus, 6502/6510 Emulation, Floppy Emulation and much more.

Dmitriy Zhivilov released a new version of the ZX-Spectrum 48/128k and Pentagon 128k emulator for the Amiga computer. Features: Emulation of all Z80 instructions, flags, registers and interrupts. Support for keyboard, Kempston joystick / mouse, border, sound, 1818VG93 and load & save in many formats. Changes in this version: Improvements for OTxR/INxR block instruction interruption flags behaviour, added (M)emory peek and an updated for the MemPTR for all I/O instructions IN R,(C)/OUT (C),R/0.

AmiArcadia is a emulator of early game consoles like the PHUNSY, Elektor TV Games Computer, Interton VC 4000, Emerson Arcadia 2001, Central Data 2650 and others. Ami Arcadia is available for the 68k Amiga, Amiga OS4, MorphOS and Windows.

A/NES is a Nintendo Entertainment System emulator for AmigaOS. The changes in this version: Improvements for optimizations / performance (CHR-RAM), startup/interrupt handler and the MMC3 IRQ.

A new version of YAPE is available. YAPE is a Windows emulator for the Commodore Plus/4 computer. The changes in this release are: Improvements for the monitor, master volume, bitmap save, TED, XAudio driver, latest Windows SDK and .LST source window with source level debugging.

Denise is a cycle accurate and platform independent C64 / Amiga emulator. This emulator is developed by piciji. The recent changes are: Amiga Debugger/Disassembler, C64 Debugger/Disassembler, support for KCS Power Cartridge and support for hard disks (Amiga) with more than 4 GB.

A/NES is a Nintendo Entertainment System emulator for AmigaOS. The changes in this version: Improvements for sprites, graphics, branch-opcodes, the Famicom Disk System and a lot of code cleanup.

Per Håkan Sundell released a new version of his Commodore C64 emulator. Changes in this version: Reverse playback, improved time-travel debugging, rewritten DirectX rendering, increased cartridge support and improved compatibility.

Dirk Hoffmann has released a new version of his VirtualC64 emulator. This emulator can turn your Mac (OS X) into a Commodore C64.

Amiberry is an optimized Amiga emulator for Intel/AMD, ARM (32bit and 64bit) and RISC-V platforms. It runs on both Linux and macOS. Amiberry uses the core from WinUAE, it has JIT support, a WHDLoad booter, support for RetroArch controller mapping and much more.

Dmitriy Zhivilov released a new version of the ZX-Spectrum 48/128k and Pentagon 128k emulator for the Amiga computer. Features: Emulation of all Z80 instructions, flags, registers and interrupts. Support for keyboard, Kempston joystick / mouse, border, sound, 1818VG93 and load & save in many formats. Changes in this version: Improvements for initialization, ReLoad menu and AY/YM emulation.

Lasect developed the pg_6502 emulator, which is a MOS 6502 CPU running entirely in PostgreSQL. The CPU registers, flags, and the 64 kB of memory are database tables; every opcode is a stored procedure.

Dmitriy Zhivilov released a new version of the ZX-Spectrum 48/128k and Pentagon 128k emulator for the Amiga computer. Features: Emulation of all Z80 instructions, flags, registers and interrupts. Support for keyboard, Kempston joystick / mouse, border, sound, 1818VG93 and load & save in many formats. Changes in this version: Improvements for the menu, OSD, BlackBright, AudioFilter, Port#FF, speed modes, dirty memory, IN-instruction and Z80 loader.

A new version of WinUAE is now available. In this version: Improvements for Chipset, OCS Denise blanking, vertical blank interrupt trigger, long/short field detection, HIGHGFX, Chip RAM mapping, integer scaling, HDF, directory filesystem, multiple emulated CD drives/images, accelerator RAM, logging, X-Surf IDE and the ROM-scanner.

The sim6502 Is an assembler-based executor for 6502 and compatible processors, with an interactive monitor, symbol table support, a Dear ImGui-based graphical debugger, and an MCP server for LLM integration. Assembly is handled by the embedded KickAssembler, enabling full macro support and rich diagnostic output.

Amiberry is an optimized Amiga emulator for Intel/AMD, ARM (32bit and 64bit) and RISC-V platforms. It runs on both Linux and macOS. Amiberry uses the core from WinUAE, it has JIT support, a WHDLoad booter, support for RetroArch controller mapping and much more.

You can watch a new video from the Dan Wood YouTube channel. In this video: Dan will show how to turn a Raspberry Pi 5000+into the ultimate Amiga using the latest version of PiMiga, one of the most complete Amiga environments available for the Raspberry Pi. From Workbench and classic software to games and modern enhancements.

You can now watch a new video from the RobSmithDev YouTube channel. In this episode: Rob talks about the development of a disk drive interface for the MiSTer. This makes it possible to use a real disk drive with the Minimig core.

TAWS (The Amiga Workbench Simulation) is a JavaScript simulation of the Amiga-Workbench 1.x - 3.x for IE, Firefox, Opera and WebKit-Browsers. With TAWS you can work with the Amiga Workbench inside your favourite web browser. Changes or improvements in this version: AmiBench, MagicMenuPrefs, Workbench, RAM, OS 3.2, OS 4.1, HippoPlayer, Menu and many bugfixes.

The Game & Watch Emulator (GNW64) is a Commodore C64 emulator the for the early Game & Watch games. The features are: Sharp S5A-CPU, plays unmodified ROM-files, custom display routines for each game, support for SuperCPU, C128 in 2 MHz mode and U64 Turbo mode. The supported games are: Ball, Vermin, Fire and Helmet.

JVIC is a Commodore VIC20 emulator written in Java, using the libGDX cross-platform development framework, targeting primarily HTML5 and the web. Being such, it can run directly in your web browser.

Online version

AmiArcadia is a emulator of early game consoles like the PHUNSY, Elektor TV Games Computer, Interton VC 4000, Emerson Arcadia 2001, Central Data 2650 and others. Ami Arcadia is available for the 68k Amiga, Amiga OS4, MorphOS and Windows.

A new version of VICE (Versatile Commodore Emulator) is now available. Changes in this version: Improvements for reSID, sounddev, VICII, Printer, Drives, c1541, petcat, Userport, Profi-DOS, Magic Desk 16, Megabyter, Comal 80, c64gs, mp3@c64, magicdesk128, partner128, MMU IO dump, chargen dump, Write Now, Minimon, WordCraft, PET/CBM video and joysticks.

A new version of WinUAE is now available. In this version: Improvements for NTSC mode, RTG, Filter panel, Processor slot RAM, RDB/OFS/FFS, Status bar, Hard drive, state file, Light pen, A2024, S3 Virge PCI, AVI Output, WASAPI, HRTMon ROM, Game ports and A2090.

A new version of YAPE is available. YAPE is a Windows emulator for the Commodore Plus/4 computer. The changes in this release are: Improvements for trace window, keyboard input mode, joystick input, 1581 CRC checksum, SID card detection (paddle port), saving to video, IEC folder directory, tape play & stop buttons and tape loading.

Murray Aickin developed a new Amiga core for the handheld game console, the Analogue Pocket. In this version: Improvements for audio, menu and file-naming.

More information on the Analogue Pocket.

Arcadia is a emulator of early game consoles like the PHUNSY, Elektor TV Games Computer, Interton VC 4000, Emerson Arcadia 2001, Central Data 2650 and others. AmiArcadia is available for the 68k Amiga, Amiga OS4, MorphOS and Windows.

Denise is a cycle accurate and platform independent C64 / Amiga emulator. This emulator is developed by piciji. The recent changes are: Improvements for screenshot, support for USBSID-Pico, 2 MHz, C64 in C128 mode, PALette measurements, Structured Basic CRT, MP3 audio recording and HDR.

Arcadia is a emulator of early game consoles like the PHUNSY, Elektor TV Games Computer, Interton VC 4000, Emerson Arcadia 2001, Central Data 2650 and others. AmiArcadia is available for the 68k Amiga, Amiga OS4, MorphOS and Windows.